BWNCF - 1174, SATIN ENAMEL - ACCENT BASE

  • MSDS: BWNCF
  • Manufacturer: PERVO PAINT CO
  • Product Name: 1174, SATIN ENAMEL - ACCENT BASE
  • National Stock Number: 8010-00N056327
Product Identification

Product ID:1174, SATIN ENAMEL - ACCENT BASE
MSDS Date:02/12/1993
FSC:8010
NIIN:00N056327
MSDS Number: BWNCF

Responsible Party
PERVO PAINT CO
6624 STANFORD AVE
LOS ANGELES, CA 90001
US

Emergency Phone: 800-424-9300 (CHEMTREC)

Info Phone: 213-758-1147

Cage: 86483

Contractor
PERVO PAINT CO
LOS ANGELES, CA 90001 US

Telephone: 213-758-1147

Cage: 86483

Ingredients

SOLVENT NAPHTHA (PETROLEUM) MEDIUM ALIPHATIC

CAS: 64742-88-7

Fraction By Weight: 10-14%

OSHA PEL 500 PPM (MFR)

ACGIH TLV: 100 PPM (MFR)


SOLVENT NAPHTHA; (HEAVY AROMATIC NAPHTHA)

CAS: 64742-94-5

RTECS: WF3100000

Fraction By Weight: 2-4%

OSHA PEL N/K

ACGIH TLV: N/K


(EX. WATER/EXEMPT SOLVENT) 250

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K


(IN. WATER/EXEMPT SOLVENT) 250

RTECS: 9999999VO

OSHA PEL N/K

ACGIH TLV: N/K

Hazards

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:ACUTE:SKIN:PROLONGED OR REPEATED
CONTACT OF PRODUCT WITH SKIN MAY CAUSE IRRITATION. EYE:DIRECT
CONTACT OF PRODUCT WITH EYES CAN CAUSE IRRITATION. INHALATION:VAPOR
OR MIST CAN CAUSE HEADACHE, NAUSEA, I RRITATION OF NOSE, THROAT AND
EYES. MAYPRODUCE CENTRAL NERVOUS SYSTEM DEPRESSION.
INGESTION:POISONOUS (EFTS OF OVEREXP)
Explanation of Carcinogenicity:NOT RELEVANT.
Effects of Overexposure:HLTH HAZ:IF SWALLOWED. MAY RESULT IN VOMITING.
ASPIRATION OF VOMITUS INTO LUNGS CAUSES ASPIRATION PNEUMONITIS.
CHRONIC:MAY CAUSE DAMAGE TO CENTRAL NERVOUS SYSTEM, RESPIRATORY
SYSTEM, EYES AND SKIN.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid

First Aid:SKIN:WASH AFFECTED AREAS W/WATER WHILE REMOVING CONTAMD
CLTHG. GET IMMED MED ATTN. LAUNDER CONTAMD CLTHG BEFORE REUSE.
EYES:FLUSH W/GENEROUS AMTS OF WATER FOR @ LEAST 15 MINS. GET IMMED
MED ATTN. INGE ST:IF SWALLOWED, DO NOT INDUCE VOMIT. CALL PHYS
IMMED. NEVER GIVE FLUIDS/INDUCE VOMIT IF VICTIM IS UNCON/HAVING
CONVLS. INHAL:MOVE TO FRESH AIR. AID IN BRTHG, IF NEC, & GET IMMED
MED ATTN.

Fire Fighting

Flash Point Method:TCC
Flash Point:105F,41C
Lower Limits:1.0%
Upper Limits:7.0%
Extinguishing Media:FOAM, CARBON DIOXIDE, DRY CHEMICAL.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA & FULL PROTECTIVE
EQUIPMENT . BLANK VAPOR WITH EXTINGUISHING MEDIA.
Unusual Fire/Explosion Hazard:FLAMMABLE VAPOR CAN FORM EXPLOSIVE
MIXTURE WITH AIR.

Accidental Release

Spill Release Procedures:SPILLS SHOULD BE CONTAINED, SOLIDIFIED, &
PLACE IN RCRA LICENSED FACILITY. HNDLG EQUIP TO BE GROUNDED TO PVNT
SPARKING. WEAR ASPIRATORS, EYES & SKIN PROT. EMPTY CNTNRS W/NO
RESIDUE @ ALL MAY BE LANDFI LLED @ LICENSED FACILITY/FOR
RECONDITION. (SUPDAT)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling

Handling and Storage Precautions:SHOWER AFTER HANDLING THIS PRODUCT.
CLEAN CLOTHING SHOULD BE WORN DAILY. EMERG EYE WASH AND DELUGE
SHOWER WHICH MEETS ANSI DESIGN CRITERIA .
Other Precautions:NONE SPECIFIED BY MANUFACTURER.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED ORGANIC VAPOR RESPIRATOR
WHEN VAPORS ARE GENERATED ABOVE PERMISSABLE LIMIT.
Ventilation:LOCAL EXHAUST TO CONTROL TO RECOMMENDED PEL.
Protective Gloves:IMPERVIOUS GLOVES .
Eye Protection:ANSI APPRVD CHEM WORKER GOGGLES .
Other Protective Equipment:COVERALLS, APRONS, BOOTS AS NECESSARY TO
PREVENT SKIN CONTACT.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
SPILL RELEASE:RECOMMEND CRUSHING OR OTHER MEANS TO PREVENT UNAUTHORIZED
REUSE. OTHER CONTAINERS MUST BE DISPOSED OF IN RCRA LICENSED
FACILITY.

Chemical Properties

Boiling Pt:B.P. Text:280F,138C
Melt/Freeze Pt:M.P/F.P Text:280F,138C
Vapor Pres:<5 @100F
Vapor Density:4.8-5.3
Spec Gravity:1.30
Evaporation Rate & Reference:<1 (BUAC = 1)
Solubility in Water:NEGLIGIBLE
Appearance and Odor:WHITE VISCOUS LIQUID, MILD AROMATIC ODOR

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING, REDUCING AGENTS IN CONJUNCTION WITH HEAT.
Stability Condition to Avoid:KEEP AWAY FROM HEAT, SPARKS OR DIRECT
SUNLIGHT.
Hazardous Decomposition Products:OXIDES OF CARBON.
Conditions to Avoid Polymerization:HEAT, POLYMERIZATION INITIATORS.

Disposal

Waste Disposal Methods:INCIN IN RCRA LICENSED FACILITY. DO NOT
DISCHARGE INTO WATERWAYS/SEWER SYS. DISPOSAL MUST BE I/A/W FEDERAL,
STATE & LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.